Analysis and explanation of general knowledge about lotion pump

Analysis and explanation of general knowledge about lotion pump

Lotion pump is a related product for hairdressing, medicine, washing packaging, and cosmetic packaging.

A. Dispensers are divided into tie type and screw type. In terms of function, they are divided into spray, foundation cream, lotion pump, aerosol valve, vacuum bottle

B. The size of the pump head is determined by the caliber of the matching bottle body. The specification of the spray is 12.5mm-24mm, and the water output is 0.1ml/time-0.2ml/time. It is generally used in the packaging of perfume, gel water and other products. The caliber The length of the same connecting pipe can be determined according to the height of the bottle body.

C. The specification range of lotion pump head is 16ml to 38ml, and the water output is 0.28ml/time to 3.1ml/time. It is generally used for cream and washing products.

D. Special dispensers such as foam pump heads and hand button nozzles. The foam pump head is a non-inflatable hand-pressed pump head that does not need to be filled with air to generate foam. Quantitative high-quality foam can be produced by light pressing . Usually with a dedicated bottle. Hand button nozzles are usually used on products such as detergents.

E. The composition of the dispenser is relatively complicated, generally including: dust cover, press head, press rod, gasket, piston, spring, valve, bottle cap, pump body, straw, valve ball (with steel ball, glass ball). Bottle caps and dust caps can be colored, electroplated, and covered with anodized aluminum rings.